Where do we start with this one! Fully custom painted and built by ourselves in 2023 from the ground up. This bike had no expense spared on it and it's dripping in top spec goodness! take at look at the spec list below! It's in excellent condition, was ride wrapped from new so is fully protected and has just been through the workshop. This bike had and RRP of £11,499 new and is now available for just £4,999!
If you're after a small Pivot firebird they don't get any better than this one!
Specification:
Frame: Pivot Firebird Carbon 29" 165mm travel with Fox Factory DHX2 coil rear shock with 400lb spring - Custom Painted in Lamborghini Blue Glauco Size Small
Fork: Fox Factory 38 180mm GRIP2 29" 44 offset
Wheels: Reynolds Blacklabel Carbon rims 29" with Industry Nine Hydra Hubs
Brakes: TRP DHR Evo Gold with Freedom Coast Gold Adjustable Levers
Rotors: Galfer Wave 203mm Front and Rear
Tyres: Continental Argotal DH Supersoft Front 29 x 2.4 & Continental Kryptotal DH Rear 29 x 2.4
Crankset: SRAM XX Carbon T Type 170mm with 32T Chainring
The Switchblade is a do it all mountain bike that shines in the bike park and on singletrack, this bike is built to handle all the mountains, all the time
Do Everything, And Do It Better
The new Switchblade has a slacker head angle, steeper seat angle, increased reach and a longer wheelbase than its predecessor. Size specific chain stays are tucked in and responsive but grow incrementally longer on larger frames. This translates to added stability at warp speeds while still maintaining the snap and pop that is ingrained in the Switchblade’s DNA.
From Trail to Park
The new Switchblade is light enough to pedal all day, but stout enough to run a Fox 38 without any worries. You can spin this rig up into the jagged high places, and it is burly enough, composed enough, planted enough and smooth enough to smash every line all the way back down, laughing the whole way.
Ultra Light Hollow Core Carbon Frame.
Size Specific Chainstays
142mm of supple yet efficient dw link™ suspension travel featuring a vertically mounted trunnion metric air shock.
Equipped with a 44mm offset 160mm travel Fox 36 Grip or Grip2.
Flip Chip for on trail geometry customization.
Compatible with both 29, 27.5+" and 27.5” rear/29” front (mullet) wheel sizes without compromise thanks to the Flip chip’s adjustable geometry feature
Large Water Bottle Clearance on all sizes.
Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.
Hassle free full internal routing with Pivot cable port system.
Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling
The Shuttle AM doesn’t shy away from touting itself as an all-mountain masterpiece that dominates the realm of e-mountain performance. This awe-inspiring e-bike strikes the perfect chord, delivering an unmatched blend of lightweight agility and long-travel prowess that hits the all-mountain sweet spot.
UNMATCHED PERFORMANCE, ENDLESS POSSIBILITIES
Crafted to be the ultimate all-mountain machine, the Shuttle AM comes equipped with everything you need to conquer any trail on the mountain. Powered by the latest Bosch Performance drive systems, all Shuttle AM models deliver class leading performance. With a long-lasting battery, the Shuttle AM provides ample range, allowing you to explore more trails and go the extra mile, or ten.
“
The Shuttle AM is our first project partnering with Bosch and showcases our commitment to pushing the limits of innovation and design. This bike embodies the perfect fusion of versatility and performance. It’s an eMTB that every rider will enjoy. The Shuttle AM hits that all-mountain sweet spot.
- CHRIS COCALIS
PRODUCT DETAILS
Get everything you need to know about the Shuttle AM.
Ultralight Hollow Core Carbon Frame.
Powerfully Smooth Bosch Performance Line CX Motor, CX Race Motor on Team Builds.
Long-range 750Wh Battery on Team and Pro Builds, 625Wh battery on Ride Builds.
Bosch 250wh PowerMore Range Extender Compatible.
Integrated Power and Mode Display.
Wheel Mounted Speed Sensor.
Wireless Bosch Remote.
160mm Fox 36 Grip 2 Factory Fork.
Flip-Chip Upper Link Mount.
Fully Mulletable and 27.5+” Wheel Compatible.
Pivot Dock Tool System Compatible.
Water Bottle Clearance on All Sizes.
Fox Factory Float X Shock with 148mm of Progressive Suspension Travel.
Injection Moulded Rubberized Frame Protection.
Full Internal Routing with Pivot Cable Port System.
SPECIFICATIONS
KIT
Pro X0 Eagle Transmission
Team XX Eagle Transmission
MSRP
£12,699
£14,899
FRAME
Shuttle AM
Shuttle AM
WHEEL SIZE
29"
29"
REAR SHOCK
Fox Factory Float X
Fox Factory Float X
FORK
Fox Factory E-MTB 36 29", 44mm offset, GRIP2 - 160mm
Fox Factory E-MTB 36 29", 44mm offset, GRIP2 - 160mm
Race ready and ultra-refined, the new Shuttle LT is the hyper capable brainchild of the Pivot engineering team that delivered our EWS-proven Firebird. Pivot’s deadly accurate combination of dw-Link suspension and proprietary carbon molding technology come together in a bike that embodies ambition.
756 WH POWERHOUSE
The downtube of the Shuttle LT houses an energy dense 756 watt-hour battery. With an origin story that began with Pivot engineers doodling battery cell configurations on a cocktail napkin, this powerhouse was developed for Pivot with Shimano’s top battery partner.
Product details
Modelled on the brand's EWS-winning Firebird bike, the Pivot Cycles Shuttle LT 29 Team XTR is designed to be a finessed, capable descender with enough travel to cushion you over rough tracks, with the bonus of a bit of extra pop on the ascent.
A Shimano EP8 drive unit, fed by a powerful 756Wh battery, offers three power-assist modes to give you a boost over the uphill stretches, so you can save all your energy for practicing the downhill portion again and again to refine your performance.
The drive unit is positioned between the cranks, with the battery carefully integrated into the downtube, so that the centre of gravity is lowered to give you better handling and an outstanding ride feel, maximising your confidence and helping you to perform at your best. It offers 85Nm of torque and 500W of maximum power, with three ride levels to speed your ascent, while dw-link™ suspension helps to counteract the effects of even the roughest surface.
The massive 160 mm of rear travel, with dual piston damper and pedal-friendly shock absorption, is paired with 170mm of front travel, courtesy of a specialist, corrosion resistant, Kashima-coated Fox Factory E-MTB 38 GRIP2 Fork. The latter delivers the stiffness, strength, support and tunability all enduro riders look for.
The high end, incredibly tough but smooth riding aluminium 29" DT Swiss Hybrid HX1501 wheelset, with Ratchet LN Technology and wide, high grip Maxxis Assegai tyres, will help you to corner efficiently, hold the trail and brake with ease. The strength of these superior, load-bearing wheels is reinforced by Super Boost Plus spacing, which offers 30% greater stiffness than Boost spacing, and will ensure they'll be able to stand up to any shocks and rattles along your route.
Meanwhile, the quality Shimano XTR M9100 shifter will work seamlessly with the quick-shifting Shimano XT M8100 cassette and the secure, precise acting rear derailleur to offer chain stability and easy, resistance free shifting. You'll therefore be able to climb comfortably and pedal with minimum effort as the trail surface and angle changes.
The light yet hardy, corrosion resistant Fox Transfer Factory Series seatpost will allow you to make tool-free adjustments to your seat height and stability on the fly, not to mention easily service it, while the Phoenix Pro E-Bike saddle is sturdy enough to neutralise chatter while you're running at speed over uneven ground. Then, when it's time to slow up, you can count on the rigid, highly sensitive, mono-body Shimano XTR M9120 4-piston disc brakes to act fast and keep you in control.
Finally, the battery can be charged in situ, without any need to remove it, and should take under three and a half hours to charge. How far that charge will take you will depend on the level of assistance you use, your own weight and the layout of the terrain you decide to tackle. Expect there to be charge remaining after a three to four hour ride, though.
Its aggressive geometry, sturdy yet light build and the extra 'pop' offered by the drive unit ensures that the Shuttle LT 29 Team XTR will be easy to handle and great fun to ride, whether you're heading uphill or downhill. Offering an advantage on the most technical terrain, and with flip chip technology to ensure a perfect fit for all cyclists, the Shuttle LT 29 Team XTR will delight enduro racers who want to save their energy to do 'one last run' that will give them an edge come competition day.
Key features:
A poppy, enduro specific E-Bike inspired by the EWS-proven Firebird
Fun to ride with the drive unit turned off, but pedal assist will let you do 'one last ride'
Built around Pivot Cycles' expertly moulded carbon fibre chassis
With DT Swiss Hybrid HX1501 wheelset, 30mm – 29"
Maxxis Assegai 29" x 2.5" tyres
dw-link™ suspension system to maximise pedalling efficiency
Fox Factory Float X shock gives an impressive 160mm rear travel
Fox Factory E-MTB 38 GRIP fork, 44mm offset, gives 170mm of travel
Shimano EP8 drive unit with a 756Wh battery
Shimano XTR M9100 12-Speed Rear Derailleur
Shimano XT M8100 10-51t cassette
Shimano XTR M9100 12-Speed shifter
Shimano XTR M9120 4-piston calliper
Shimano XT M8150 crankset
Phoenix Team Low Rise Carbon handlebar maximises control
Pivot Cycles' own Phoenix Team Enduro/Trail stem
Fox Transfer Factory Series seatpost
Phoenix Pro E-Bike saddle
KIT
Team XTR
STARTING PRICE
£12,349.00
FRAME
Shuttle LT Shimano
WHEEL SIZE
29"
REAR SHOCK
Fox Factory Float X
FORK
Fox Factory E-MTB 38 29", 44mm offset, GRIP2 - 170mm
HEADSET
Pivot Precision Sealed Cartridge
REAR DER
Shimano XTR M9100 SGS 12-Speed
CASSETTE
Shimano XT M8100 10-51t
SHIFTER
Shimano XTR M9100 ISPEC EV 12-Speed
BRAKES
Shimano XTR M9120 4-piston
CRANKSET
Shimano XT M8150 E-MTB 34t
HANDLEBAR
Phoenix Team Low Rise Carbon
GRIPS
Phoenix Factory Lock-On
STEM
Phoenix Team Enduro/Trail
SEATPOST
Fox Transfer Factory Series 150mm (SM), 175mm (MD-LG), 200mm (XL)
SADDLE
WTB High Tail Trail Pro (SM), Phoenix WTB Pro Volt (Medium Width) (MD), Pivot Pro E-Bike (LG-XL)
WHEELS
DT Swiss Hybrid HX1501, 30mm - 29" 15x110 F/12x157 R
WHEEL MATERIAL
Alloy
TIRES
Maxxis Assegai 29" x 2.5" TR, EXO+, 3C Maxxis Assegai 29" x 2.5" TR, EXO+, 3C
Get everything you need to know about theSwitchblade V3.
Ultra-Light Hollow Core Carbon Frame.
Size Specific Chainstays.
Equipped with a 44mm offset 160mm-travel Fox 36 Grip2.
Flip Chip for on-trail geometry customization.
Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling.
Hassle free full internal routing with Pivot cable port system.
Compatible with both 29, 27.5+” and 27.5” rear/29” front (mullet) wheel sizes without compromise thanks to the Flip chip’s adjustable geometry feature.
142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock.
Large Water Bottle Clearance on all sizes.
Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.
Optimized for the Entire Mountain
We tailored every detail of the Switchblade to deliver a bike that’s ready to conquer the entire mountain. Progressive geometry broadens the performance envelope while retaining the versatility that made the original so good. Always with an eye on confidence-inspiring design, we shortened, straightened, and steepened the Switchblade’s seat tube to allow for longer travel dropper seat posts. The all-new compact frame design reduces weight and increases stiffness, but perhaps best of all, it allows for greatly reduced stand over height across a broad range of sizes. With an industry-leading fit philosophy, the Switchblade offers an ideal fit for riders from 5’ to 6’7” tall.
Uncommon Versatility
The Switchblade was already a bike ahead of its time and the new Switchblade pushes the versatility envelope even further. It doesn’t matter if you want to run 29er wheels, 27.5" X 2.8” plus tires or even a 29”/27.5” combo – the Switchblade can be perfected for all. A new flip chip with two settings means there isn’t any compromise in geometry. Choose the geometry that best fits your setup or handling preferences. The all-new Switchblade’s extraordinary versatility and category bending capability redefine performance across every type of trail.
Graphics, colours, and specifications are subject to change without prior notification.
SPECIFICATIONS
STARTING PRICE
Pro XT/XTR Build
£7999.00
FRAME
Switchblade
WHEEL SIZE
29"
REAR SHOCK
Fox Factory FLOATX
FORK
Fox Factory 36 29", 44mm offset, GRIP2 - 160mm
HEADSET
Pivot Precision Sealed Cartridge
REAR DER
Shimano XTR M9100 SGS 12-Speed
CASSETTE
Shimano XT M8100 10-51t
SHIFTER
Shimano XT M8100 ISPEC EV 12-Speed
BRAKES
Shimano XT M8120 4-piston
CRANKSET
Race Face Æffect R 32t
HANDLEBAR
Phoenix Team Low Rise Carbon - 760mm (XS), 780mm (SM-LG), One Up Low Rise Carbon 800mm (XL)
GRIPS
Phoenix Factory Lock-On
STEM
Phoenix Team Enduro/Trail
SEATPOST
Fox Factory Transfer 125mm (XS), 150mm (SM), 175mm (MD), 200mm (LG-XL)
SADDLE
Phoenix WTB Pro High Tail Trail (XS, SM), Phoenix WTB Volt Pro (Medium Width) (MD-XL)
WHEELS
DT Swiss XM1700 w/ DT Swiss 350 hub & 36t Star Ratchet 30mm - 29" 15x110 F/12x157 R
WHEEL MATERIAL
Alloy
STARTING PRICE
Pro XO AXS Transmission
£8999.00
FRAME
Switchblade
WHEEL SIZE
29"
REAR SHOCK
Fox Factory FLOATX
FORK
Fox Factory 36 29", 44mm offset, GRIP2 - 160mm
HEADSET
Pivot Precision Sealed Cartridge
REAR DER
SRAM XO AXS Transmission
CASSETTE
SRAM XO AXS Transmission
SHIFTER
SRAM XO AXS Pod Controller
BRAKES
SRAM Code RSC 4 Piston
CRANKSET
SRAM XO Eagle Dub 32T
HANDLEBAR
Phoenix Team Low Rise Carbon - 760mm (XS), 780mm (SM-LG), One Up Low Rise Carbon 800mm (XL)
GRIPS
Phoenix Factory Lock-On
STEM
Phoenix Team Enduro/Trail
SEATPOST
Fox Factory Transfer 125mm (XS), 150mm (SM), 175mm (MD), 200mm (LG-XL)
SADDLE
Phoenix WTB Pro High Tail Trail (XS, SM), Phoenix WTB Volt Pro (Medium Width) (MD-XL)
WHEELS
DT Swiss XM1700 w/ DT Swiss 350 hub & 36t Star Ratchet 30mm - 29" 15x110 F/12x157 R